Slider Object

Note: For Canvas Series see Slider Object for Canvas .

See also: User Interface

See also: Graphic Object Toolbox

 

Topic Menu

Overview of the Slider Object

This object allows an analog value to be adjusted with a simulated slider and/or trim buttons. The Slider Object can be accessed through the Home > Project Toolbox > Touch Objects > Slider. User must be on a Screen and not in the Main work area in order to see the Objects Project Toolbox items.

Select the Slider object and drag to a new screen. This object can be placed anywhere on the screen.

 

Slider Object Configuration

 

Controller Register

Data Source

External Registers - To view data on the screen from an external device connected using configurable protocols, it is required to map the data into OCS registers/variables and then display the data on the screen.

  • The external registers (registers/variables of the device connected to OCS through serial/Ethernet protocols) can be directly accessed from the graphics objects. This provides three major benefits:

    • Ease of programming

    • Reduced register/variable usage

    • Data transferred only when required

Accessing External Registers - Configure the protocol for communication with the external device.

Note: The scan list configuration is not required if the user wants to only access the data of external device from the OCS screens.

  1. Place the graphics object for displaying the data and double click to configure its properties. Select the required protocol from the Data Source dropdown.

  2. Enter the parameter address/variables of the external device parameters. Select the register/variable width for the configured external parameter.

  3. When the OCS switches to the screen having objects with external registers in RUN mode, the data is polled from the external device and displayed on the screen.

Local Register - This section specifies the main OCS register/variable that is associated with the object. Depending on the individual object’s functionality, this register/variable may be read, written or both by the object. This section may contain up to three fields. The first field contains the action register/variable designation (i.e., %R12 / Var_1). The second field allows the register selection by alias name. The third field is only present on objects that accept multiple data sizes and is used to select binary (1bit) or analog (8, 16 or 32 bits).

 

Scale

Show Scale Limits - Enables display of specified limits on ends of slide scale.

Font - Font used to display limits.

Maximum and Minimum - Establishes the range of the slider object. Slider will limit value output value based on these limits (during movement only).

Ticks - Specifies the number of tick marks (divisions) displayed on slide scale. If tick marks are not desired, set number to zero.

 

Display Properties for Slider

 

Attributes >>>

Static

Visible

  • Non-touch units* - all objects are always visible, so as a result both the static and dynamic override fields will be grayed out.

  • Touch units** - the visibility attribute may be set as static or dynamic.

  • *Non-touch units include X2, XLE, and XLEe.

    **Touch Units include all XL series, Prime Series, and Micro OCS series controllers.

  • When the attribute is statically set to ON, the object is always visible and always responds to touch signals.

  • When the attribute is statically set invisible (unchecked) the object is not drawn but if the object is the front most object it responds to touch signals. For example, placing a statically invisible screen jump object in front of a bitmap allows the bitmap to be drawn but touching the location of the invisible screen jump causes the screen jump action to be performed.

  • When this attribute is dynamically enabled the visibility of the object is controlled by the associated bit in the override register. When the bit is ON the object is drawn and operates normally. When the bit is OFF the object is not drawn and does respond to any touch signals.

Flash – When statically set, an object will ’Flash’ the data display continuously or the animation ICON when the associated control register is in the ON state. When dynamically overridden, a three-state display can be created: OFF, ON solid and ON flash, depending both on the state of the control register and the Override Register.

Border – This attribute, available only statically, provides a decorative border (rectangle) drawn around the inside of the objects bounding rectangle. This border is typically removed to allow either a more elaborate border to be drawn with the drawing primitives or no border at all.

Enable Input – This attribute, optionally available only as dynamically overridden, allows the object or the object editor to ignore keystrokes directed to that object. This allows run-time determination on whether to restrict input access to that object. This allows the user to create operator privilege or in-motion lockout of object modification. If this box is NOT checked, the associated object always accepts input.

 

Dynamic

Color – This attribute allows some objects to dynamically change colors. Up to four additional colors can be selected for an object. If none of the color attribute override bits are set the object defaults to the color chosen in the main object properties.

Override variable – This register / variable is used to control the dynamic properties like visible, Flash, Enable Input and Colors.

 

Legend >>>

Border, Background, line color, font and justification can be set in Legend Plate properties. Selecting Legend >>> button displays the following window:

Text – User can configure a descriptive text (legend) to be included with-in the objects bounding rectangle. Returns may be inserted for multiple lines.

Justification – This option is used to display the legend text in the configured position within a graphic object.

Font – User can select the available fonts / font size to be applied to legend text.

Insert Special Char >>> - Selecting this option displays the following window wherein user can select different fonts / special characters available to be added in legend:

 

Access>>>

User can select access level from 0 to 7 in the drop down as shown. User logged in with the configured Access level (of graphic object) only will have access to that particular graphic object.

Note: Default access level is 0 (Zero) for all the access level supported graphic objects.

See also: Security & Passwords

 

Background >>>

Selecting Background>>> opens the following dialog:

Centre Color>>> - Displays the Color Picker window.

 

Color Picker

Applies the selected color from color picker as solid background color for the graphic object. Selecting Background>>> displays the following color picker window: 

Selecting More >>> displays the following window allowing user to select color apart from default colors available in the above displayed color picker window.

 

Legend / Line Color >>>

Selecting Legend / Line Color >>> option displays the Color Picker dialog for user to select the color and this will be applied to the legend and line (boundary) of the graphic object.

 

Show slider

Enables (sizes object) the slider control. If only trim buttons are desired, then uncheck this option.

Return to the Top: Slider Object