Controller Specifications

See also: The Controller Overview

See also: Download a Program to a Controller

 

Topic Menu

 

Resource Limits by OCS Family

XLE/XLT Series

XLE/XLT Resource Value
%SClosed Single-bit bit coils predefined for system use. 13
%SRClosed 16-bit registers predefined for system use. 192
%TClosed Non-retentive single-bit registers. 2048
%MClosed Retentive single-bit registers. 2048
%RClosed Retentive 16-bit registers. 9999
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit.

20 keys (10 fn keys and 4 soft keys) for XLe

5 keys (4 fn keys and 1 sys key) for XLT
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 1023
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 2048
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 2048
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 512
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 512
%IG 64
%QG 64
%AIG 32
%AQG 32
Network Ports CsCANClosed Horner APG's proprietary network protocol that runs on the Bosch CAN network specifications. Prior to the advent of the OCS. (Optional depending on model)
Controllers Per Network 253
Keypad 20 keys (10 fn keys and 4 soft keys)
Display

128x64 LCD Backlit, monochrome for XLE

160x128 LCD Backlit, monochrome for XLT

User Screens 1023
Data Fields per User Screen 50
Ladder Logic Memory 256kB
Logic Scan rate 0.7 mS/K

 

Return to the Top: Controller Specifications

 

XLEe/XLTe Series

XLEe/XLTe Resource Value
%SClosed Single-bit bit coils predefined for system use. 16
%SRClosed 16-bit registers predefined for system use. 256
%TClosed Non-retentive single-bit registers. 2048
%MClosed Retentive single-bit registers. 2048
%RClosed Retentive 16-bit registers. 9999
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit.

XLEe - 10

XLTe - 4
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 1023
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 2048
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 2048
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 512
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 512
%IG 64
%QG 64
%AIG 32
%AQG 32
Network Ports CsCAN (Optional depending on model)
Ethernet (300)

PingClosed A network diagnostic tool used primarily to test the connectivity between two nodes or devices. To ping a destination node, an Internet Control Message Protocol (ICMP) echo request packet is sent to that node. If a connection is available, the destination node responds with an echo reply. Ping calculates the round-trip time of the data packet's route from its source to the destination and back and determines whether any packets were lost during the trip., EGDClosed EGD - Ethernet Global Data - EGD is a communications protocol developed by GE. EGD allows a device (the Producer) to transfer data to other devices (the Consumers) on the network., SRTPClosed SRTP - Service Request Transfer Protocol - A GE Fanuc Automation protocol, which allows a remote SRTP Client to request services from a SRTP Server.,

Modbus TCP Master (Downloadable protocol) & Slave,

Ethernet IP, FTPClosed FTP - File Transfer Protocol - A standard Client/Server Internet protocol, based on RFC959, which supports file transfers over a TCP/IP network., or HTTP @ 10 MBd or 100 MBd,

ASCIIClosed ASCII - American Standard Code for Information Interchange - ASCII-coded characters are single-byte values in the range of 0 (zero) to 127. Codes in the range 128 to 255 are not defined by the ASCII standard, but rather by the equipment manufacturer. Over TCP/IPClosed TCP/IP – Transmission Control Protocol / Internet Protocol - A transport layer protocol and a network layer protocol developed by the Department of Defense. This is a commonly used combination for communication within networks and across internetwork.
Controllers Per Network 253
Keypad 20 keys (10 fn keys and 4 soft keys)
Display

128x64 LCD Backlit, monochrome for XLEe

160x128 LCD Backlit, monochrome for XLTe
User Screens 1023
Data Fields per User Screen 50
Ladder Logic Memory 256kB
Logic Scan rate 0.7 mS/K

 

Return to the Top: Controller Specifications

 

XL4, EXL6, EXLW, XL7, EXL10 (Includes Prime series)

XL Series Value
%SClosed Single-bit bit coils predefined for system use. 256
%SRClosed 16-bit registers predefined for system use. 222
%TClosed Non-retentive single-bit registers. 16384
%MClosed Retentive single-bit registers. 16384
%RClosed Retentive 16-bit registers. 50000
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit.

4 - XL4e, 5 - XL7e/EXL6e, 7 - EXL10e
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 1023
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 2048
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 2048
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 512
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 512
Ethernet (300)

CsCAN, PingClosed A network diagnostic tool used primarily to test the connectivity between two nodes or devices. To ping a destination node, an Internet Control Message Protocol (ICMP) echo request packet is sent to that node. If a connection is available, the destination node responds with an echo reply. Ping calculates the round-trip time of the data packet's route from its source to the destination and back and determines whether any packets were lost during the trip., EGDClosed EGD - Ethernet Global Data - EGD is a communications protocol developed by GE. EGD allows a device (the Producer) to transfer data to other devices (the Consumers) on the network., SRTPClosed SRTP - Service Request Transfer Protocol - A GE Fanuc Automation protocol, which allows a remote SRTP Client to request services from a SRTP Server.,

Modbus TCP Master (Downloadable protocol) & Slave,

Ethernet IP, FTPClosed FTP - File Transfer Protocol - A standard Client/Server Internet protocol, based on RFC959, which supports file transfers over a TCP/IP network., or HTTP @ 10MBd or 100MBd
CsCAN 50 kBd,125kBd, 250kBd, 500kBd, or 1MBd
Serial Ports RS-232 & RS-485Closed An EIA standard that specifies electrical characteristics of drivers and receivers for use in serial communications. Electrical signaling is balanced and multipoint systems are supported. Port
IDs Per CsCAN Network 64 w/o repeat (253 w/ 3 repeatersClosed A device that amplifies or adds to incoming electrical signals and retransmits them, in order to compensate for transmission losses. Repeaters can be used to add additional nodes and/or distance to the network and protect the signal against noisy environments.)
Keypad

5 keys (4 Function keys and a System Key)

Maximum 8 Keys ( 1 SYS+ 7 Fn) For EXL10e
User Screens 1023
Data Fields Per User Screen 1023
Ladder Logic Memory 2 MB
Logic Scan rate 0.013 mS/K

 

Return to the Top: Controller Specifications

 

CANVAS 4, CANVAS 5, CANVAS 7, CANVAS 7D, CANVAS 10

CANVAS Series Value
%SClosed Single-bit bit coils predefined for system use. 16
%SRClosed 16-bit registers predefined for system use. 256
%TClosed Non-retentive single-bit registers. 16384
%MClosed Retentive single-bit registers. 16384
%RClosed Retentive 16-bit registers. 50000
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit. 7
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 1023
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 2048
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 2048
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 512
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 512
Ethernet (300)

CsCAN, PingClosed A network diagnostic tool used primarily to test the connectivity between two nodes or devices. To ping a destination node, an Internet Control Message Protocol (ICMP) echo request packet is sent to that node. If a connection is available, the destination node responds with an echo reply. Ping calculates the round-trip time of the data packet's route from its source to the destination and back and determines whether any packets were lost during the trip., EGDClosed EGD - Ethernet Global Data - EGD is a communications protocol developed by GE. EGD allows a device (the Producer) to transfer data to other devices (the Consumers) on the network., SRTPClosed SRTP - Service Request Transfer Protocol - A GE Fanuc Automation protocol, which allows a remote SRTP Client to request services from a SRTP Server.,

Modbus TCP Master (Downloadable protocol) & Slave,

Ethernet IP, FTPClosed FTP - File Transfer Protocol - A standard Client/Server Internet protocol, based on RFC959, which supports file transfers over a TCP/IP network., or HTTP @ 10MBd or 100MBd
CsCAN 50 kBd,125kBd, 250kBd, 500kBd, or 1MBd
Serial Ports RS-232 & RS-485Closed An EIA standard that specifies electrical characteristics of drivers and receivers for use in serial communications. Electrical signaling is balanced and multipoint systems are supported. Port
IDs Per CsCAN Network 64 w/o repeat (253 w/ 3 repeatersClosed A device that amplifies or adds to incoming electrical signals and retransmits them, in order to compensate for transmission losses. Repeaters can be used to add additional nodes and/or distance to the network and protect the signal against noisy environments.)
Keypad

5 keys (4 Function keys and a System Key)

Maximum 8 Keys ( 1 SYS+ 7 Fn) For EXL10e
User Screens 1023
Data Fields Per User Screen 1023
Ladder Logic Memory 2 MB
Logic Scan rate 0.013 mS/K

Return to the Top: Controller Specifications

 

XL15+ Series

XL15+ Series Value
%SClosed Single-bit bit coils predefined for system use. 16
%SRClosed 16-bit registers predefined for system use. 256
%TClosed Non-retentive single-bit registers. 16000
%MClosed Retentive single-bit registers. 16000
%RClosed Retentive 16-bit registers. 49999
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit. 7
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 1023
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 2048
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 2048
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 512
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 512
Ethernet (300)

CsCAN, PingClosed A network diagnostic tool used primarily to test the connectivity between two nodes or devices. To ping a destination node, an Internet Control Message Protocol (ICMP) echo request packet is sent to that node. If a connection is available, the destination node responds with an echo reply. Ping calculates the round-trip time of the data packet's route from its source to the destination and back and determines whether any packets were lost during the trip., EGDClosed EGD - Ethernet Global Data - EGD is a communications protocol developed by GE. EGD allows a device (the Producer) to transfer data to other devices (the Consumers) on the network., SRTPClosed SRTP - Service Request Transfer Protocol - A GE Fanuc Automation protocol, which allows a remote SRTP Client to request services from a SRTP Server.,

Modbus TCP Master (Downloadable protocol) & Slave,

Ethernet IP, FTPClosed FTP - File Transfer Protocol - A standard Client/Server Internet protocol, based on RFC959, which supports file transfers over a TCP/IP network., or HTTP @ 10, 100, or 1000Mbps
CsCAN 50 kBd, 125kBd, 250kBd, 500kBd, or 1MBd
Serial Ports RS-232 & RS-485Closed An EIA standard that specifies electrical characteristics of drivers and receivers for use in serial communications. Electrical signaling is balanced and multipoint systems are supported. Ports
IDs Per CsCAN Network 64 w/o repeat (253 w/ 3 repeatersClosed A device that amplifies or adds to incoming electrical signals and retransmits them, in order to compensate for transmission losses. Repeaters can be used to add additional nodes and/or distance to the network and protect the signal against noisy environments.)
Keypad 8 keys (7 Function keys and a System Key)
User Screens 1023
Data Fields Per User Screen 1023
Ladder Logic Memory 2 MB
Logic Scan rate 0.006 mS/K

 

Return to the Top: Controller Specifications

 

X2 OCS

X2 Value
%SClosed Single-bit bit coils predefined for system use. 13
%SRClosed 16-bit registers predefined for system use. 256
%TClosed Non-retentive single-bit registers. 1024
%MClosed Retentive single-bit registers. 1024
%RClosed Retentive 16-bit registers. 5000
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit. 10
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 250
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 1024
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 1024
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 256
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 256
CsCAN 50 kBd, 125kBd, 250kBd, 500kBd, or 1MBd
Serial Ports RS-232 & RS-485Closed An EIA standard that specifies electrical characteristics of drivers and receivers for use in serial communications. Electrical signaling is balanced and multipoint systems are supported. Ports
IDs Per CsCAN Network 64 w/o repeat (253 w/ 3 repeatersClosed A device that amplifies or adds to incoming electrical signals and retransmits them, in order to compensate for transmission losses. Repeaters can be used to add additional nodes and/or distance to the network and protect the signal against noisy environments.)
Keypad 20 Metal Dome Keys
User Screens 250
Data Fields Per User Screen 15
Ladder Logic Memory 512 kB
Logic Scan Rate 1.2 mS/K

 

Return to the Top: Controller Specifications

 

X4, X7, & X10

X4, X7, & X10 Value
%SClosed Single-bit bit coils predefined for system use. 16
%SRClosed 16-bit registers predefined for system use. 256
%TClosed Non-retentive single-bit registers. 1024
%MClosed Retentive single-bit registers. 1024
%RClosed Retentive 16-bit registers. 5000
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit. 4
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 250
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 1024
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 1024
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 256
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 256
Ethernet (300)

CsCAN, PingClosed A network diagnostic tool used primarily to test the connectivity between two nodes or devices. To ping a destination node, an Internet Control Message Protocol (ICMP) echo request packet is sent to that node. If a connection is available, the destination node responds with an echo reply. Ping calculates the round-trip time of the data packet's route from its source to the destination and back and determines whether any packets were lost during the trip., Modbus TCP Master (Downloadable protocol) & Slave,

Ethernet IP, FTPClosed FTP - File Transfer Protocol - A standard Client/Server Internet protocol, based on RFC959, which supports file transfers over a TCP/IP network., or EGDClosed EGD - Ethernet Global Data - EGD is a communications protocol developed by GE. EGD allows a device (the Producer) to transfer data to other devices (the Consumers) on the network. (EGD does not support Multicast)

CsCAN 125kBd, 250kBd, 500kBd, or 1MBd
Serial Ports RS-232 & RS-485Closed An EIA standard that specifies electrical characteristics of drivers and receivers for use in serial communications. Electrical signaling is balanced and multipoint systems are supported. Port (Single Connector)
IDs Per CsCAN Network 64 w/o repeat (253 w/ 3 repeatersClosed A device that amplifies or adds to incoming electrical signals and retransmits them, in order to compensate for transmission losses. Repeaters can be used to add additional nodes and/or distance to the network and protect the signal against noisy environments.)
Keypad Slide Keys (Touch)
User Screens 250
Data Fields Per User Screen 100
Ladder Logic Memory 512 kB
Logic Scan Rate

0.4 mS/K

 

Return to the Top: Controller Specifications

 

X5 OCS

X5 Value
%SClosed Single-bit bit coils predefined for system use. 256
%SRClosed 16-bit registers predefined for system use. 256
%TClosed Non-retentive single-bit registers. 2048
%MClosed Retentive single-bit registers. 2048
%RClosed Retentive 16-bit registers. Limit is up to 8192 (Retentive is up to 1024)
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit. 4
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. 1023
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 2048
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 2048
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 512
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 512
%IG 256
%QG 256
%AIG 32
%AQG 32
Ethernet (300)

CsCAN, PingClosed A network diagnostic tool used primarily to test the connectivity between two nodes or devices. To ping a destination node, an Internet Control Message Protocol (ICMP) echo request packet is sent to that node. If a connection is available, the destination node responds with an echo reply. Ping calculates the round-trip time of the data packet's route from its source to the destination and back and determines whether any packets were lost during the trip., SRTP, Modbus TCP Master (Downloadable protocol) & Slave,
Ethernet IP, FTPClosed FTP - File Transfer Protocol - A standard Client/Server Internet protocol, based on RFC959, which supports file transfers over a TCP/IP network., or EGD (EGD does not support Multicast)

CsCAN 50 kBd, 125kBd, 250kBd, 500kBd, or 1MBd
Serial Ports RS-232 & RS-485Closed An EIA standard that specifies electrical characteristics of drivers and receivers for use in serial communications. Electrical signaling is balanced and multipoint systems are supported. Ports (Software Selectable)
Keypad 4 user-defined Function keys and a System key
User Screens 1023
Data Fields Per User Screen 1023
Ladder Logic Memory 2 MB
Logic Scan Rate 0.013 mS/K

 

Return to the Top: Controller Specifications

 

RCC Series (Does not include RCC6512)

RCC Series Value
%SClosed Single-bit bit coils predefined for system use. 16
%SRClosed 16-bit registers predefined for system use. 256
%TClosed Non-retentive single-bit registers. 2048
%MClosed Retentive single-bit registers. 2048
%RClosed Retentive 16-bit registers. 49999 (RCC972 - 4096)
%KClosed Single-bit flags used to give the programmer direct access to any front panel function key (F1, F2, etc.) appearing on a unit. --
%DClosed Single-bit flags used to control or monitor display screen on units that have screens. --
%IClosed Single-bit input registers. Typically, an external switch is connected to the registers. 2048
%QClosed Single-bit output registers. Typically, these bits are connected to an actuator, indicator light or other physical outputs. 2048
%AIClosed 16-bit input registers used to gather analog input data such as voltages, temperatures, and speed settings coming from an attached device. 512
%AQClosed 16-bit output registers used to send analog information such a voltages, levels, or speed settings to an attached device. 512
Ethernet (300)

CsCAN, PingClosed A network diagnostic tool used primarily to test the connectivity between two nodes or devices. To ping a destination node, an Internet Control Message Protocol (ICMP) echo request packet is sent to that node. If a connection is available, the destination node responds with an echo reply. Ping calculates the round-trip time of the data packet's route from its source to the destination and back and determines whether any packets were lost during the trip., EGDClosed EGD - Ethernet Global Data - EGD is a communications protocol developed by GE. EGD allows a device (the Producer) to transfer data to other devices (the Consumers) on the network., SRTPClosed SRTP - Service Request Transfer Protocol - A GE Fanuc Automation protocol, which allows a remote SRTP Client to request services from a SRTP Server.,

Modbus TCP Master (Downloadable protocol) & Slave,

Ethernet IP, FTPClosed FTP - File Transfer Protocol - A standard Client/Server Internet protocol, based on RFC959, which supports file transfers over a TCP/IP network., or HTTP @ 10MBd or 100MBd

CsCAN 125kBd, 250kBd, 500kBd, or 1MBd
Serial Ports RS-232 & RS-485Closed An EIA standard that specifies electrical characteristics of drivers and receivers for use in serial communications. Electrical signaling is balanced and multipoint systems are supported. Port (Software Selectable)
IDs Per CsCAN Network 64 w/o repeat (253 w/ 3 repeatersClosed A device that amplifies or adds to incoming electrical signals and retransmits them, in order to compensate for transmission losses. Repeaters can be used to add additional nodes and/or distance to the network and protect the signal against noisy environments.)
Ladder Logic Memory 1024kB (RCC972 - 128kB)
Logic Scan Rate 0.013 mS/K

 

Return to the Top: Controller Specifications

 

Legacy Products

For issues with any controller, please refer to our [Documentation Support] page on our website. Datasheets will have all technical specifications and wiring diagrams, while the user manual encompasses a wide array of information needed to set up, configure, and run a product. Refer to the Support > Downloads on the Horner APG website for Firmware and Cscape downloads of the revisions below.

Note: Updating to the end version of either firmware or software adds benefits and corrections.

Series

US Part #

EU Part #

Device Type/ Nickname

End Firmware Version

End Cscape Version

Replacement Option

Color OCS Touch

HE500OCS3xx

HE500OCS3xx

OCS35x

11.95

9.80SP4

EXL6/EXLW

HE500OCS451

HE500OCS451

OCS451

11.95

9.80SP4

EXL10/X10

HE500OCS551

HE500OCS551

OCS551

11.95

9.80SP4

EXL10/X10/XL15+

HE500OCS651

HE500OCS651

OCS651

11.95

9.80SP4

XL+

Classic OCS/RCS

HE500OCS1xx

HE500OCS1xx

OCS1xx

11.95

9.80SP4

Micro OCS Series/ XL Series

HE500OCS2xx

HE500OCS2xx

OCS2xx

11.95

9.80SP4

Micro OCS Series/ XL Series

HE500RCS2xx

HE500RCS2xx

RCS2xx

11.95

9.80SP4

RCC

HE500RCS1xx

HE500RCS1xx

RCS1xx

11.95

9.80SP4

RCC

HE500RCS9xx

HE500RCS9xx

RCS9xx

11.95

9.80SP4

RCC

Classic Mini OCS

HE500OCS0xx

HE500OCS0xx

Mini OCS

11.95

9.80SP4

Micro OCS Series/ XL Series

HE500OCXxxx

HE500OCXxxx

Mini OCS

11.95

9.80SP4

Micro OCS Series/ XL Series

HE500RCS0xx

HE500RCS0xx

Mini RCS

11.95

9.80SP4

RCC

 

 

Series

US Part #

EU Part #

Device Type/ Nickname

End Firmware Version

End Cscape Version

Replacement Option

LX Series

HELX280

HELX280

LX280 (Mono)

14.08

9.90SP3

EXL6/EXLW

HELX300

HELX300

LX300 (Color)

14.08

9.90SP3

EXL6/EXLW

NX Series

HE-NX22x

HENX22xC10x

NX

14.08

9.90SP3

Micro OCS Series/ XL Series

HE-NX25x

HENX25xC10x

NX

14.08

9.90SP3

Micro OCS Series/ XL Series

HE-NX26x

HENX261C10x

NX

14.08

9.90SP3

Micro OCS Series/ XL Series

HE=NX29x

HENX9x1C103

NX

14.08

9.90SP3

Micro OCS Series/ XL Series

QX Series

HE-QX351

HEQX351103

QX

14.08

9.90SP3

EXL6/EXLW

HE-QX451/ HE-QX451-xx

HEQX451Cxxx

QX

14.08

9.90SP3

EXLW/XL7/X7

HE-QX5x1/ HE-QX5x1-xx

HEQX5x1Cxxx

QX

14.08

9.90SP3

EXL10/X10

HE-QX6x1/ HE-QX6x1-xx

HEQX651Cxxx

QX

14.08

9.90SP3

EXL10/X10/XL15+

HE-QX7x1/ HE-QX7x1-xx

HEQX751Cxxx

QX

14.08

9.90SP3

XL15+

HE-BP41

HE-BP41

QX

14.08

9.90SP3

SmartRail/

SmartMod

HE-BP43

HE-BP43

QX

14.08

9.90SP3

SmartRail/ SmartMod

 

 

 

HE-RX371

 

 

 

HE-RX371Cxxx

QX

14.08

9.90SP3

EXL6/EXLW

RCX Series

 

HEXC116

HEXC116

RCX

14.08

9.90SP3

RCC

HECX25x

HECX25x

RCS

14.08

9.90SP3

RCC

XL Series

HE-XL1xx

HEXT35xCxxx

XL6/XL6e

14.08

9.90SP3

EXL6 / EXLW

HE-XL1xx

HEXT280Cxxx

XL6m

14.08

9.90SP3

EXL6 /EXLW

HE-XV1Ex

HEXT501C1xx

XL10e

14.18

9.90SP3

EXL10/X10

HE-XV1Ex

Gen 2 Serial begin at 100000

Gen1 XLE/XLT

14.18

9.90SP3

XLE/XLT; XLEe/ XLTe

ZX Series

HE-ZXx52

HE-ZXx52

ZX

15.02

9.90SP3

XL15+

FOX100/x04 with all SmartStack

HE800FOX104/

HE800FOX404

HE800FOX104/

HE800FOX404

FOX I/O

14.08

9.90SP3

SmartRail / SmartMod

 

Return to the Top: Controller Specifications